Haier HWF10DW1 User Manual page 9

Daily use
Add individual selections
Select required options and settings refer to "Control
panel".
Start wash programme
Delay Speed Up Temp Spin Start/Pause
Speed
Touch "Start/ Pause" button to start. Appliance
operates according to selected settings. Changes are
only possible by cancelling wash programme.
Geeneral information and tips:
1. For safety reasons the door is locked partially during the washing cycle. It is
only possible to open the door at the end of the programme or after the
programme was cancelled correctly (see description ab ove).
2. In case of high water level, high water temperature and drum spinning it is
impossible to open the door, Lock- is displayed.
Interrupt- cancel wash programme
To interrupt a running programme press gently
"Start /Pause" button. Press it again to resume
operation.
To cancel a running programme and all its individual
settings activate "Start/Pause" and then hold
"On/Off" for about 3 seconds.
Geeneral information and tips:
Choose programme settings carefully refering to icons on each laudry label
and "Care chart". Removing laundry promptly at the end of cycle will minimise
weinkling.
After washing
Turn off the water supply and unplug the power cord.
Open the door to prevent formation of moisture and
odours. Leave it open while not used.
16 17
Care chart
Daily use