Advertisement
)&&1RWLFH
This device has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC (Federal
Communications Commission) Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This device generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance
with given instructions, may cause harmful interference in radio
communications.
However, this is not a guarantee that interference will not occur in all
installations. If this device does cause harmful interference in radio
or television reception, the user is encouraged to correct the
interference by trying one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the distance between the computer and the receiver.
Connect the computer to an outlet on a circuit different from
that to which the receiver is connected.
Consult your dealer or an experienced radio/TV technician.
&DXWLRQ
To comply with the limits for Class B digital devices, pursuant to Part
15 of the FCC Rules, this device must be installed in computer
equipment certified to comply with the Class B limits. All cables
used to connect the computer and peripherals must be shielded
and grounded. Operation with non-certified computers or non-
shielded cables may result in interference in radio or television
reception.
0RGLILFDWLRQV
Any changes or modifications not expressly approved by the grantee
of this device could void the user's authority to operate this device.
'HFODUDWLRQRI&RQIRUPLW\
According to the FCC96 208 and ET95-19 documents,
Name:
Creative Labs Inc.
and Ensoniq Corp.
Address:
Creative Labs
1901 McCarthy Boulevard
Milpitas, CA. 95035
United States
Tel: (408) 428-6600
Address:
Ensoniq Corp.
P.O. Box 3035
155 Great Valley Parkway
Malvern, PA 19355-0735
Tel: (610) 647-3930
declares under its sole responsibility that the product
Trade Name:
CreativeLabs/Ensoniq
Model Number:
ES1370 (AudioPCI)
has been tested according to the FCC / CISPR22/85
requirements for Class B devices and found compliant
with the following standards:
EMI/EMC:
ANSI C63.4 1992, FCC Part 15 Subpart B
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesirable
operation
Ce matériel est conforme à la section 15 des régles FCC.
Son Fonctionnement est soumis aux deux conditions suivantes:
1. Le matériel ne peut étre source D'interférences et
2. Doit accepter toutes les interférences reques, Y compris
celles pouvant provoquer un fonctionnement indésirable.
Compliance Manager
Creative Labs, Inc.
February 17, 1998
Advertisement
