Vcr And Cable Box - Sony Wega KDE42XBR950 Operating Instructions Manual

VCR and Cable Box
Your cable company scranables some channels, such as premium
channels _which requires yon to use a cable box_. but does not scranlble
all channels.
With this connection, you can use all the dual picture features_
Use the TV remote control to change channels coming through the cable
box. I You must first program the remote control for your specific cable
box: see "Progranlmmg the Remote Control" on page 52.)
Use the TV remote control to change channels coming directly into the
FV's CABLE jack. (The TV's tuner provides a better signal than the
cable box.
Record channels coming through the cable box and channels con_mg
directly into the TV
A splitter, which is a small, inexpensive device that you can purchase at
your local electronics store.
Fhree coaxial cables.
One A/V cable or one S VIDEO cable with audio cables.
Connect the CATV cable to the single (input)jack of the splitter.
Use the supplied antenna cable to connect one of the splitter's two
output jacks to the TV's CABLE jack.
Use a coaxial cable to connect the splitter's other output jack to the
cable box's input jack.
Use a coaxial cable to connect the cable box's output jack to the VCR's
RF input jack.
Use an A/V cable to connect the VCR's A/V output jacks to the TV's
A/V input jacks.
Use a coaxial cable to connect the VCR's RF output jack to the TV's
VHF/UHF jack.
Run the Auto Setup program, as described in "Setting Up the Channel
List" on page 48.
,_ Using S VIDEO jacks? See page 30.