Sony Wega KDE42XBR950 Operating Instructions Manual page 121

Audio
Good plcture, no sound Press so that disappears from the screen _see page 50k
Make sure the option is set to in the Audio Menu (see page 100)
_For KDE61XBR950 only) Make sure the switch at the rear of the
displa) unit _s set to
Audio noise Communication problems may occur if the infrared communication eqmpment
le.g,, infrared cordless headphones) is used near the TV. Please use headphones
other than infrared cordless headphones_ Also. if you use the infrared
commumcauon equipment other than infrared cordless headphones, move the
infrared transceiver away from the TV until the noise is eliminated or move the
zransmitter and receiver of the infrared communication eqmpment closer together_
Cannot gain enough volume increase the volume of the cable box using the cable box's remote control. Then
when using a cable box press repeatedl) until the TV indicator lights up and actmst the TV's
volume.
Sotmd seems weak or The TV's audio might be set to or when it might be better set to
insufficient In the Audio Menu (see page 99), set the setting to . If
alread3 set to . switch to (which may reduce background noise
during weak stereo broadcasts
Cannot raise the volume on if the option _s set to and the option _s set to (in
external speakers order to output the sound to your audm system) use your audm receiver to adjust
the sound i see page 100). Or. to use the TV remote control, set the
option to
To turn on the TV speakers, set the option to i see page 100k
Channels
Cannot receive upper channels Press to select the VHF/UH F inpu L (see page 50)
(UHF) when using an antenna Use in the Channel Menu to add receivable channels that are not
presently in the TV's memory (see page 103),
TV is fixed to one channel Use in the Channel Menu to add receivable channels that _re not
presently in the TV's memory (see page 103).
Carmot receive any channels Use in the Channel Menu to add receivable channels that are not
when using cable TV presently in the TV's memory (see page 103),
Press to select the CABLE input. (see page 50).
Cannot receive or select Use in the Channel Menu to add receivable TV channels that are
channels not presently in TV memory (see page 103).
oi ie caigi c eis are & Tgnc igie c ompanies h a iimiiai ons ......
not being displayed channels. Check with your cable c0mpa_y for more information.
The digital cable channel may be set to in the Digital Setup Menu (see page
70).
?i!!