Adjusting The Volume For Traffic Announcements And The Beep Tone; Tape Operation; Inserting A Tape; Removing A Tape - Blaupunkt COBURG DJ A Operating Instructions Manual

Adjusting the volume for traffic
announcements and the beep
tone
This volume was preset at the factory,
though you can alter the value using the
DSC function (see "DSC programming, TA
VOL").
If the volume level is altered while a mes-
sage is being played, this will only affect the
current announcement.

Tape operation

The car stereo has to be switched on.
The unit will automatically switch to tape
operation when inserting a cassette.

Inserting a tape

• Turn on the set.
• Insert a tape.
The cassette will be automatically transport-
ed to the playback position. Side A or 1 starts
to play.
During tape operation, "TR 1" or "TR 2"
(track) will be indicated on the display pan-
el.
Insert the tape with side A or 1 facing up, the open side
showing to the right.

Removing a tape

• Press for 1 sec.
The cassette will eject.

Fast Forward/Rewind

Fast forward
Fast rewind
/ Title selection (S-CPS)
Up
Down
Stop function by pressing .

Selecting titles with CPS

(Cassette Programme Search)
Use this function to skip ( ) and repeat ( )
recorded titles.
To start CPS:
• Press / .
In order for CPS to function properly, there
has to be an unrecorded tape portion of at
least 3 seconds between the individual ti-
tles.
43