Important; Power Requirements; Conformity; Using Gap Standard Compliance - Philips SE7451B/51 User Manual

1

Important

Take time to read this user manual before you
use your phone. It contains important
information and notes regarding your phone.

1.1 Power requirements

• This product requires an electrical supply of
220-240 volts AC. In case of power failure, the
communication can be lost.
• The Electrical network is classified as
hazardous. The only way to power down the
charger is to unplug the power supply from the
electrical outlet. Ensure that the electrical
outlet is always easily accessible.
• The voltage on the network is classified as
TNV-3 (Telecommunication Network
Voltages), as defined in the standard EN 60-
950.
Warning
To avoid damage or malfunction:
• Do not allow the charging contacts or the
battery to come into contact with metal
objects.
• Do not open it as you could be exposed to high
voltages.
• Do not allow the charger to come into contact
with liquids.
• Never use any other battery than the one
delivered with the product or recommended
by Philips: risk of explosion.
• Always use the cables provided with the
product.
• Handsfree activation could suddenly increase
the volume in the earpiece to a very high level:
make sure the handset is not too close to your
ear.
• This equipment is not designed to make
emergency calls when the power fails. An
alternative has to be made available to allow
emergency calls.
• Do not expose the phone to excessive heat
caused by heating equipment or direct sunlight.
• Do not drop your phone or allow objects to
fall on your phone.
Important
• Do not use any cleaning agents containing
alcohol, ammonia, benzene, or abrasives as
these may harm the set.
• Do not use the product in places where there
are explosive hazards.
• Do not let small metal objects come into
contact with the product. This can deteriorate
audio quality and damage the product.
• Active mobile phones in the vicinity may cause
interference.
About operating and storage temperatures:
• Operate in a place where temperature is
always between 0 and 35º C (32 to 95º F).
• Store in a place where temperature is always
between -20 and 45º C (-4 to 113º F).
• Battery life may be shortened in low
temperature conditions.

1.2 Conformity

We, Philips declare that the product is in
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
This product can only be connected to the
analogue telephone networks of the countries
mentioned on the packaging.
You can find the Declaration of Conformity on
www.p4c.philips.com.

1.3 Using GAP standard compliance

The GAP standard guarantees that all DECT
GAP handsets and base stations comply with
a minimum operating standard irrespective of
their make.Your handset and base station are
GAP compliant, which means the minimum
guaranteed functions are:
register a handset, take the line, receive a call and
dial.The advanced features may not be
available if you use another handset than a SE740/
745 with your base station.
To register and use your SE740/745 handset with
a GAP standard base station of a
different make, first follow the procedure
described in the manufacturer's instructions, then
follow the procedure described on page 36.
To register a handset of another make to the
TM
3