Telnet - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Telnet

On the Management / Telnet page, you can enable or disable access to the device settings via
TELNET from your LAN. Access via TELNET is disabled by default.
To disable access via TELNET, move the Enable Telnet switch to the left and click the APPLY
button.
To enable access via TELNET again, move the Enable Telnet switch to the right. In the Port
field, enter the number of the router's port through which access will be allowed (by default, the
port 23 is specified). Then click the APPLY button.
Figure 124. The Management / Telnet page.
Page 147 of 163
Configuring via Web-based Interface