112
2-1. Instrument cluster
Settings display
Meter display settings that can be
■
changed
Language
Select to change the language on the dis-
play.
Units
Select to change the units of measure dis-
played.
Eco Driving Indicator Light
(P.106)
Select to enable/disable the Eco Driving
Indicator Light.
Switch settings
Displays a procedure to register a desired
screen to
You can register 1 screen as a shortcut,
which can be displayed by pressing
Drive information screen (P.105)
Select to select up to 2 items that will be
displayed on each Drive information
screen (Drive information 1 screen, Drive
information 2 screen, and Drive informa-
tion 3 screen) respectively.
Pop-up display (P.102)
Select to enable/disable the pop-up dis-
play.
• Intersection Guidance
• Telephone
• Audio Feedback
• Volume Feedback
• Adjust Brightness
• TVD MODE (if equipped)
Rev indicator (P.100)
RC F̲OM̲(GE)̲1903
RC F_OM_General_OM24838E
.
• Select to enable/disable the Rev indica-
tor.
• Select to set the desired engine speed at
which the Rev indicator will begin to be
displayed.
Rev peak (P.101)
Select to enable/disable the Rev peak.
Gauge options
Select to change the displayed meters for
each applicable drive mode.
Default setting
Select to reset the meter display settings to
the default setting.
Vehicle functions and settings that
■
can be changed
P.404
Suspension of the settings display
■
Some settings cannot be changed while
●
driving. When changing settings, park
.
the vehicle in a safe place.
If a warning message is displayed, opera-
●
tion of the settings display will be sus-
pended.
When disconnecting and reconnecting
■
battery terminals
The following information data will be reset:
Drive information
●
Lap timer: Measured lap times, history
●
G-force: Record of the maximum
●
G-forces
Customization
■
Some functions can be customized.
(P.404)