Table of Contents
Advertisement
Settings
Security
You can set a PIN code. When it is activated, a window asking you to enter the PIN
code appears when you turn on the handset so as to prevent unauthorized use of the
handset.
PIN code request
You can activate a PIN (Personal Identification Number).
You can check the current status of configuration from the status bar.
1. Select PIN code request from the security menu and press the
2. Configure this item to On or Off. If it is On, a PIN code will be required whenever
the handset is turned on.
3. Input the current PIN code and press the
4. Entering an incorrect PIN code 3 times in the PIN code input window invalidates
the PIN code. In this case, the PUK code must be entered in order to reset the PIN
code.
5. The maximum number of attempts at PUK code input permitted is 10. Entering an
incorrect PUK code 10 times will restrict use of the handset. In this case, ask
Customer Service to unlock your handset.
Press the Back key in the PIN code input window to return to the previous step.
Change codes
You can change PIN, PIN2, the security code and the call barring password.
n
Note
If you change the code and then forget it you will need to contact your place of purchase to
unlock it or solve this problem.
]
PIN/PIN 2 code
This menu allows you to change the PIN or PIN2 code.
1. Select Change codes from the Security Settings List and press the
2. Select PIN or PIN2 Code and press the
84
key.
key.
Menu 8.5
key.
key.
Advertisement
Table of Contents
