Index Search 47 - Philips VRZ342AT99 Owner's Manual

VRZ342comb.QX33 4/7/99 10:06 PM
This feature allows you to index the starting points of programs
that you have recorded on a tape. Then, you can easily rewind or
fast forward to that point.
Example:
If you are watching program number 4 and you want to fast for-
ward to program number 7, skip three programs.
CURRENT PLAYBACK PROGRAM
Beginning of tape
Pro. 1 Pro. 2 Pro.3 Pro. 4 Pro. 5 Pro. 6 Pro. 7
4 3 2
INDEX MARK
1
Press the VCR button.
2
Press the INDEX SEARCH button.
INDEX SEARCH
00
ENTER INDEX NUMBER
3
Within 10 seconds, use the Number buttons to enter the
number of programs that you want to skip. For example,
to skip three programs, press Number buttons 0, 3. If you do not
make an entry within 10 seconds, the VCR will exit Index Search
mode.
4
Within 10 seconds, press the F.FWD/B button or the
REW(ind)/{ button to skip forward or backward. The
VCR will fast forward or rewind to the beginning of the desired
program, then begin playback. (The program numbers count down
on-screen as the searching progresses. To remove the on-screen
counter, press the INDEX SEARCH button once.)
Page 47
End of tape
1 1 2 3

Index Search 47

POWER EJECT
VCR/TV SPEED MEMORY
REC/OTR PAUSE/STILL
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
3
CH.
4 5 6
7 8 9
0
MUTE +100
VOL.
1
VCR TV CBL/DBS
VCR PLUS+
VAR.SLOW /ENTER SLOW
TRACKING F.ADV X2 PLAY
QUICK TIME INDEX REC END SKIP
2
SEARCH
Helpful Hints
• Every time an index mark is
skipped, the number of programs
decreases by one.
• Up to 20 index marks may be
searched.
• This function will not operate in
recording mode.
• Press the STOP/p button to stop
the search.
• An index mark will be made auto-
matically when the REC(ord)/OTR
button is pressed, or at the begin-
ning of a Timer Recording or OTR.
• The index mark is not made where
the PAUSE/STILL button is pressed
and released during recording.
• The time gap between index marks
should be greater than 1 minute for
SP recording, 2 minutes for LP
recording, and 3 minutes for SLP
recording.
4