Playing 31 - Philips VRZ342AT99 Owner's Manual

VRZ342comb.QX33 4/7/99 10:06 PM
Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside
lights will appear on the display panel. If the tape's record tab has
been removed, playback will start automatically.
3
If playback does not start automatically, press the
PLAY/o button.
4
Press the STOP/p button on the remote control or the
STOP/EJECT button on the VCR once to stop playback.
5
Press the REW(ind)/{ button to rewind the tape.
6
When the tape stops, press the EJECT button on the
remote control or the STOP/EJECT button on the VCR
to remove the tape.
Page 31

Playing 31

1 Turn on the TV.
2 Insert a tape in the VCR.
POWER EJECT
VCR/TV SPEED MEMORY
REC/OTR PAUSE/STILL
5
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
0
+100
MUTE
VOL.
VCR TV CBL/DBS
VCR PLUS+
/ENTER
VAR.SLOW SLOW
TRACKING F.ADV X2 PLAY
QUICK TIME INDEX REC END SKIP
SEARCH
Helpful Hints
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR is in
VCR position. (The VCR light will
appear on the display panel. If it
does not, press the VCR/TV button.)
Press the VCR button, then press
the PLAY/o button.
• Other playback options and fea-
tures are on pages 45 - 53.
6
3
4