Locating Management Functions; Front Panel Leds - IBM TS4300 3555 User Manual

3. If a PIN is configured, enter the PIN, then select Login and press Enter.
Status icons
Figure 56. Front panel LEDs
Table 30. Front panel LEDs
LEDs
Ready
Unit ID
Clean
Attention
Error

Locating Management functions

This table provides the menu navigation to assist with library setup and configuration.
Table 31. Locating Management functions
Task
Advanced settings
Auto Calibration
Auto Clean
Cartridge, eject from a drive
Color
Green
Blue when
activated
Amber
Amber
Amber
Operator Panel
Not available with this interface
Not available with this interface
Not available with this interface
Operation > Move Cartridge from
Drive to Home Slot
Descriptions
Steady when power is on, flashing with tape
Ready drive or library robotic activity.
The unit identification (UID) LEDs are controlled
by the user through the Maintenance > UID
LED Control screen. The UIDs on the Operator
Panel and base module back panel are
activated and deactivated together. In addition,
UIDs on drives and expansion module back
panels can be activated separately. The UIDs
are helpful for locating components of the
library in a data center.
On, when a tape drive-cleaning operation is
recommended.
Flashing if the library detected a condition for
which user attention is necessary, but the
library can still complete most operations.
On, if an unrecoverable tape drive or library
error occurs. A corresponding error message is
displayed on the LCD screen. User intervention
is required as the library is not capable of
completing some operations.
Menu Navigation
Management GUI
Settings > Library > Advanced
Settings > Library > Auto Calibration
Library > Logical Libraries > Actions
> Manage Logical Library (Expert
Mode) See "Methods of cleaning
drives" on page 72.
Drives > Actions > Eject Cartridge
from Drive
Chapter 4. Managing 65