Automatic Clock Setting - Philips VRZ362AT99 Owner's Manual

VRZ362comb.QX33 4/7/99 8:26 PM

Automatic Clock Setting

1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
REMOTE LOCATOR
TO END PUSH EXIT
2
Press the PLAY/o button or the STOP/p button to select
SET CLOCK, then press the F.FWD/B button.
3
If OFF appears to the right of AUTO CLOCK, press the
F.FWD/B button to select ON. Then, press the MENU
button. Or, if ON appears to the right of AUTO CLOCK,
press the MENU button. Go to step 4.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT op CHOOSE B
TO END PUSH EXIT
4
If you want the VCR to locate a local PBS station from
which to take the time, press the PLAY/o button or the
STOP/p button to select SET PBS CH. AUTO. Then
press the F.FWD/B button. When the current time appears
on-screen, you're finished. Press the STATUS/EXIT button. Or,
you may be prompted to turn off the VCR. Press the
STATUS/EXIT button, then go to step 5.
If you want to tell the VCR the PBS station from which
to take the time, press the PLAY/o button or the
STOP/p button to select SET PBS CH. MANUAL. Press
the F.FWD/B button, then use the Number buttons to
enter the channel number of the desired PBS station.
When the current time appears on-screen, you're finished. Press
the STATUS/EXIT button.
NOTE: CANNOT FIND PBS CLOCK DATA may flash on-screen. In this
case, press the PLAY/o button or the STOP/p button to choose
SELECT NEW PBS CH., then press the F.FWD/B button. Use the
Number buttons to enter the channel number of another PBS station.
Or, press the PLAY/o button or the STOP/p button to select SET
PBS CH. AUTO. Press the F.FWD/B button. You will be prompted to
turn off the VCR. Press the STATUS/EXIT button, then go to step 5.
5
Turn off the VCR power, and leave it off for several min-
utes. When the current time appears on the VCR display panel,
the clock is set. You may turn on the VCR again.
Page 17
Setting the Clock (cont'd) 17
5
POWER
VCR/TV SPEED
REC/OTR
PLAY
REW
STOP
1
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
MUTE +100
VCR TV CBL/DBS
VCR PLUS+
/ENTER
VAR.SLOW
TRACKING F.ADV
QUICK TIME INDEX REC END
SEARCH
Helpful Hints
• If you enter an incorrect PBS chan-
nel number at step 4, press the
CLEAR button, then enter the cor-
rect channel number.
• If you have an antenna, you may
select channels 2 - 69 at step 4. If
you have a cable connection, you
may select channels 1 - 125.
• The clock cannot be set automati-
cally if you don't receive a channel
that carries a time signal in your
area. Set the clock manually.
• If there are only a few channels in
your area that carry time signals,
setting the clock automatically may
take several minutes. If nothing
happens even after you wait several
minutes, set the clock manually.
• You cannot select AUTO CLOCK at
step 3 during tape playback.
2-4
EJECT
MEMORY
PAUSE/STILL
F.FWD
3
CH.
4
VOL.
SLOW
X2 PLAY
SKIP