Recording 25 - Philips/Magnavox VRX260AT99 User Manual

VRX260 LAYOUT 4/8/99 8:53 PM
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape with its record tab intact in the VCR.
3
If the VCR light appears on the display panel, go to step 4. If the
VCR light does not appear, press the VCR/TV button
once.
4
Press the SPEED button until the desired tape speed appears
briefly on-screen. (Details about tape speed are on page 30.)
5
Use the CHANNEL o/p buttons or the Number buttons
to select the channel to be recorded.
6
Press the REC(ord)/OTR button once to start recording.
The REC light will appear.
7
To pause the recording, press the PAUSE/STILL button
once. The REC light will flash. To resume recording, press
the REC(ord)/OTR button or press the PAUSE/STILL
button again. The REC light will come on again.
8
To stop recording, press the STOP/p button.
Page 25

Recording 25

1 Turn on the TV.
2 Insert a tape in the VCR.
POWER VCR/TV EJECT
1 2 3
4 5 6
CHANNEL
7 8 9
0 +100
VCR PLUS+
4
SPEED TIME SEARCH MEMORY
MENU STATUS/EXIT CLEAR SLOW
REWIND /PLAY F.FWD
6
REC/OTR /STOP PAUSE/STILL
Helpful Hints
• If you press the REC(ord)/OTR but-
ton when there is not a tape in the
VCR, NO CASSETTE will flash on-
screen.
• If you press the REC(ord)/OTR but-
ton while a tape without a record
tab is in the VCR, the VCR will eject
the tape and PROTECTED CAS-
SETTE CANNOT RECORD will flash
on-screen.
• Other recording options are on
pages 26 - 36.
• You can change the tape speed
during a recording, but some distor-
tion will appear on the tape.
• The VCR will record in a preset vol-
ume.
3
5
7
8