Table of Contents
Advertisement
ç Contents
Cannot determine access point
●
The WPS buttons on numerous access points were pressed
simultaneously. Try reconnecting again.
No access points found
●
Check to make sure that the access point is turned on.
●
When connecting to an access point manually, make sure that you
entered the correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
Check the access point security settings ( = 211).
●
IP address conflict
●
Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
●
You may be in an environment where Wi-Fi signals are obstructed.
●
Avoid using the camera's Wi-Fi function around microwave ovens,
Bluetooth devices, and other devices that operate on the 2.4 GHz band.
●
Bring the camera closer to the other device you are trying to connect to
(such as the access point), and make sure there are no objects between
the devices.
●
Check the connected device to make sure it is not experiencing errors.
Sending failed
Memory card error
●
If the same error message is displayed even when you have inserted
a formatted memory card facing the correct way, contact a Canon
Customer Support Help Desk.
Receiving failed
Insufficient space on card
●
There is not enough free space on the memory card in the target camera
to receive images. Erase images to create space on the memory card, or
insert a memory card with sufficient space.
308
Advertisement
Table of Contents
