Bissell 2007 Series User Manual page 10

Cleaning with Hose and Tools
» Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
» The Brush Roll continues to turn while product is turned ON and handle is in upright position.
To avoid damage to carpet, rugs, furniture, and flooring, avoid tipping cleaner or setting it on
furniture, fringed area rugs or carpeted stairs during tool use.
» With Brush Roll on, do not allow cleaner to sit in one location for an extended period of time,
as damage to floor can result.
1
Lift the Accessory Hose Door on top of
foot on the front of the machine. The
door flips toward the machine to open.
3
Attach selected tool
to the end of the hose.
(Tools may vary by
model.) Press the
Power Switch to turn
machine ON.
10
www.BISSELL.com
2
Insert the hose and snap into place.
Be sure the coloured hose release clip
is facing out, away from machine.
4
Press the Spray Trigger button to spray the soiled area,
then slowly move tool back and forth over the area.
Release the trigger to suck up the dirty solution. Work in
small sections until the area is clean.
When finished cleaning, turn the machine ON to suction
up warm clean water to rinse the inside of the hose and
tool. Detach the hose and tool and close the Accessory
Hose Door. Let the hose and tool air dry before storing.