Table of Contents
Advertisement
Pipe mounting
Mount the WirelessHART adapter on a pipe as shown in the figure "Separate installation with
mounting support on a pipe".
Figure 5-5
5.8
Checks after mounting
Checks after mounting the WirelessHART adapter
After mounting the WirelessHART adapter, make the following checks:
● Is the WirelessHART adapter damaged (visual check)?
● Does the WirelessHART adapter satisfy the specifications for the location such as ambient
temperature, relative humidity etc.?
● Is the antenna correctly aligned?
● Is the WirelessHART adapter installed far enough away from a wall, a pipe or a mast?
● Is the mounting support for the wall/pipe correctly mounted?
● Have the mounting collar and locking nut been tightened?
WirelessHART Adapter SITRANS AW200
Operating Instructions, 02/2020, A5E02777161-AA
Separate installation with mounting support on a pipe
Assembling
5.8 Checks after mounting
29
Advertisement
Table of Contents
