Bid Knobs Bracket; Figure 123 Output Side-Printing Engine; Figure 124 Press Output With Output Assembly Cover Removed - HP Indigo Press WS4000 Service Manual

HP Indigo press ws4000 Cluster 1 procedures
Calibrating the vacuum box and web break sensor, page 192.

BID knobs bracket

Drive NIP guard
•1. Remove the old wire cover (Figure 123).
•2. Loosen the four screws that attach the Output assembly cover
(Figure 123).

Figure 124 Press Output with Output assembly cover removed

•3. Remove the Output assembly cover from the press. The press Output side
will appear as in Figure 124.
proprietary and confidential
Figure 123 Output side–printing engine
CA293-00600, Rev 00
Output assembly cover
Old wire cover
page 116 of 221