Important Safety Instructions - CYBEX CP-20665 Owner's Manual

1-2 – IMPORTANT SAFTEY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with safety being the
highest priority. However, improper use can result in personal injury and / or property damage.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
As needed, dust off the panel with a soft dry cloth. The screen can be cleaned with computer screen wipes or other
non abrasive, moist, disposable wipes, such as "Gym Wipes".
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Do not expose batteries to excessive heat sources.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
Use only with the mounting bracket specified by the manufacturer or sold with the apparatus.
Ensure the apparatus is securely mounted on the Mounting Bracket.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases,
are placed on the apparatus.
To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC
receptacle.
The mains plug of the power supply cord shall remain readily operable.
Overloading – Do not overload the AC outlets or extension cords.
Replacement Parts – In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer.
Safety Check – Upon completion of service or repair work, request the service technician to perform safety check
to ensure that the apparatus is in proper operating condition.
Consult your dealer if you are ever in doubt about the installation, operation or safety of this monitor.
1-2