Table of Contents
Advertisement
Sound control
Volume adjustment
• Adjust the volume by using MASTER VOLUME
(-VOLUME/+on the remote control).
The volume level in
(decibel) is displayed.
y
Incredible Surround
Stereo sound is determined by the distance between the front
speakers. Incredible Surround enables you to enjoy an incredibly
wide stereo effect, regardless of the speakers' distance.
• Press INCREDIBLE SURR. (INCREDIBLE SURROUND on the
remote control) to switch the surround sound effect either
on or off.
is shown and
y
INCREDIBLE SURROUND
is displayed if the surround sound effect is on.
Note: The effect of Incredible Surround may vary with different
types of music.
Treble and Bass level adjustment
1 Press TREBLE or BASS on the unit.
The volume rotary is activated to select the treble/bass
y
settings.
2 Turn the volume rotary to adjust the treble or bass.
y
or
and the actual value (between –5
and +5) is displayed briefly.
Note: If the volume rotary is not turned for 5 seconds, it will
switch back to volume.
PURE
• Press PURE repeatedly to switch bass and treble settings
either on or off.
is shown and
y
PURE
settings are switched off.
is displayed if preset bass and treble
y
settings are switched on.
is displayed if personal preset bass and
y
treble settings are switched on.
is displayed if bass and treble
BASIC FUNCTIONS
LOUDNESS
• Press LOUDNESS to switch loudness either on or off.
is shown and
y
LOUDNESS
loudness is on.
MUTE
This feature allows you to temporarily switch off the sound
without switching off the unit.
1 Press MUTE on the remote control to switch off the sound.
y
is displayed and playback/recording will be
continued without sound.
2 Press MUTE on the remote control again to switch on the
sound again.
Speaker balance
It is possible to adjust the relative volume balance between
the connected front speakers.
• Press L BALANCE or R BALANCE on the remote control to
adjust the relative volume of the left or right front speaker.
(or ) and the actual volume of the left
y
(or right) front speaker are displayed.
When the volume of both speakers is balanced,
y
is displayed.
Demo mode
The demo mode displays various features of the unit and will
start automatically.
• If any source key is pressed:
The unit switches to the selected source.
y
If y STANDBY ON is pressed:
The unit switches to standby. After a few seconds, the
y
demonstration will start again.
Cancelling the demo mode
• Keep Ç STOP on the unit pressed for at least 3 seconds to
cancel the demo mode.
The demo mode is cancelled permanently. The unit
y
switches to standby. A few seconds later the unit
switches to an economy power save mode.
is displayed if
13
Advertisement
Table of Contents
