Setting User Information - HoMedics PDM-100 Manual

SETTING USER INFORMATION

1. Press the MODE button until you reach
STEP mode.
2. Press and hold the SET button until UNIT
displays on the screen, and a blinking
MILE or KM.
3. To change the measurement, press the
RESET button. Each press will change
the selection in a cycling manner.
Pressing the MODE button will confirm
the entry.
Note: By selecting MILE, all information
will be displayed in Imperial format. By
selecting KM, all information will be dis-
played in Metric format.
4. To change the WEIGHT, press the RESET
button to increase the number by one in
a cycling manner. Pressing the MODE
button will confirm the entry.
5. To change the STRIDE LENGTH,
press the RESET button to increase
the selection and the MODE button to
confirm the entry.
11