Table of Contents
Advertisement
Radio Reception
Tuning to radio stations
1
Press TUNER to select TUNER mode.
"TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
2
Press TUNER again to select the desired
waveband : FM or MW.
3
Press and hold à or á until the frequency
indication starts to change, then release.
The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4
Repeat step 3 if necessary until you find the
desired radio station.
To tune to a weak station, press à or á briefly
and repeatedly until optimal reception found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
Plug and Play setting (refer to "Basic Functions -
Plug and Play").
OR
1
Press TUNER to select TUNER mode.
18
VAC
DBB INC SURR
MAX
SOUND
To begin automatic preset from a desired
preset number
Press í or ë to select the desired preset
number.
If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2
Press and hold PROGRAM until "AUTO" is
displayed.
starts flashing.
PROG
All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by MW band.
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To stop storing the automatic preset
Press PROGRAM or Ç on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
DISC
DSC
VAC
ALBUM
SHUFFLE
REC
.
Advertisement
Table of Contents
