Warning Symbols; End Duration - Beko DCY 9316 W User Manual

Operating the product
5.8 Auxiliary functions
Sound warning cancel
Drying machine makes sound warnings when
the Programme is completed. If you don't
want sound notifications, press the "Sound
Notification" button.
When you press the sound notification but-
ton it lights up, and Programme does not
make sound notifications when completed.
C
You can select this function
before or after the Programme
starts.
Anti-creasing
A 2-hour anti creasing program to prevent
laundry from creasing will be activated
if you do not take the laundry out after
the program has come to an end. This
programme rotates the laundry in 10-minute
intervals to prevent creasing.

5.9 Warning symbols

C
Warning symbols may vary
according to the specifications of
your machine.
Fiber filter cleaning
When the Programme is completed, a warn-
ing led lights up, which indicates that the
filter has to be cleaned.
C
If the filter cleaning led blinks, see
the „Troubleshooting" chapter.
Water tank
When the Programme is completed, a warn-
ing led lights up, which indicates that the
water tank must be emptied.
If the water tank fills up while the
Programme is running, warning led starts
blinking and the machine goes into stand-by.
In that case empty the water in the water
tank and start the Programme by pressing
the Start / Pause button. Warning led turns
off and the Programme resumes.
20 / EN
Loading door open
Start/Pause led blinks when the loading door
of the drying machine is open.

5.10 End duration

You can delay the end duration of the
Programme for up to 24 hours with the end
duration function.
1. Open the loading door and place your
laundry.
2. Select the drying Programme.
3. Press the end duration selection button
and set the delay duration you want.
End duration led lights up. (End dura-
tion moves continuously when you keep
pressing the button).
4. Press the Start / Pause button. End dura-
tion countdown begins. The ":" sign in
the middle of the displayed delay dura-
tion blinks.
C
You can add or remove laundry
for the duration of the end
duration. The duration displayed
on the screen is the sum of the
normal drying duration and the
end duration. At the end of the
countdown the end duration
led turns off, drying beings and
drying led lights up.
Changing the end duration
If you want to change the duration during
the countdown:
1. Cancel the Programme by pressing
the On/Off button. Turn on the drying
machine again by pressing the On/Off
button. When your drying machine turns
on for the first time, it turns on with the
declaration (cotton wardrobe dryness)
Programme.
2. Select the Programme you desire using
the Programme Selection knob.
3. Repeat the end duration operation for
the duration you want.
4. Start the Programme by pressing the
Start / Pause button.
Dryer / User Manual