The remote control does not function
properly.
The time is not working.
The Clock/Timer setting is erased.
Some files on the USB device are not
displayed.
"DEVICE NOT SUPPORTED" scrolls on the
display.
Troubleshooting
✔
Select the source (DISC or TUNER, for example)
before pressing the function button
(É Å,í,ë).
✔
Reduce the distance between the remote
control and the system.
✔
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
✔
Replace the batteries.
✔
Point the remote control directly towards the IR
sensor.
✔
Set the clock correctly.
✔
In standby mode, press SLEEP/TIMER on the
remote control to switch on the timer.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔
Check if the number of folders exceeds 99 or
the number of titles exceeds 999.
✔
Remove the USB mass storage device or select
another source.
31