Connect Power; Prepare The Remote Control - Philips FWM417X/78 User Manual

1
Hold down the socket fl ap.
2
Insert the stripped part of the wire
completely.
• Insert the right speaker wires to "
left speaker wires to " L".
• Insert the red wires and blue wires
to " +", black wires to " -".
• Release the socket fl ap.
a b

Connect power

AM ANTENNA
FM ANTENNA
AUX/CDR IN
R L
LOW CH
- +
L
R
L
R
SPEAKERS 6Ω
Caution
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage set on the voltage selector on the back
of the unit.
• Before connecting the AC power cord, ensure
you have completed all other connections.
Note
•
The type plate is located on the back of the
main unit.
1
If your power supply voltage is 110V-
127V, adjust the voltage selector to 110V-
127V.
2
R",

Prepare the remote control

•
c To replace the remote control battery:
1
2
3
1
•
•
•
Connect the AC power cable to:
• the main unit.
• the wall socket.
Caution
Risk of explosion! Keep batteries away from
heat, sunshine or fi re. Never discard batteries
in fi re.
Open the battery compartment.
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
Close the battery compartment.
3
2
Note
If you are not going to use the remote control
for a long time, remove the batteries.
Do not use old and new or different types of
batteries in combination.
Batteries contain chemical substances, so they
should be disposed of properly.
EN 11