Adjust Settings; General Setup; Audio Setup; Video Setup - Philips FWD410/98 User Manual

8 Adjust settings

1
Press SETUP.
» The following menu is displayed.
Symbol Description

[General Setup]

[Audio Setup]

[Video Setup]

[Preference Setup]
2
Select a setup page.
3
Select an option and then press
4
Select a setting and then press OK.
To return to the previous menu, press
( ) or
To exit the menu, press
again.
General setup
On the [General Setup] page, you can set the
following options:
[OSD Language]
Select the preferred language for on-screen
display.
[Screen Saver]
The screen saver protects the TV screen
damage due to prolonged exposure to a static
image.
[On] – Enable the screen saver.
[Off] – Disable the screen saver.
[Auto Standby]
Turn off or on automatic standby switching
mode. It is an energy saving feature.
[On] – Switch to standby after 15 minutes
of inactivity (for example, in pause or stop
mode).
[Off] – Disable auto standby mode.
22 EN
( ).
BACK.
SETUP
®
Display the DivX registration code.
Tip
Enter this DivX registration code when you rent or
purchase video from www.divx.com/vod. The DivX
videos rented or purchased through the DivX
(Video On Demand) service can be played only on the
device to which it is registered.
Audio setup
On the [Audio Setup] page, you can set the
following options:
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
[On]
only).
[Off] – enjoy surround sound with its full
dynamic range.
Video setup
On the [Video Setup] page, you can set the
following options:
[TV System]
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
[PAL] - For TV with PAL color system.
[NTSC] - For TV with NTSC color system.
[Multi] - For TV that is compatible with
both PAL and NTSC.
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
®
VOD