Tip
[STEREO] is the default setting for tuner mode.
In tuner mode, you can press RADIO repeatedly to
switch between [STEREO] and [MONO]. The unit
memorizes your setting even if you turn off the unit or
turn to other sources.
Program radio stations
Note
You can program a maximum of 40 preset radio
stations.
Program radio stations automatically
Press and hold REPEAT/PROGRAM for
more than 2 seconds to activate automatic
programming.
» All available stations are programmed
in the order of waveband reception
strength.
»
broadcast automatically.
Program radio stations manually
1
Tune to a radio station (see 'Tune to a
radio station' on page 18).
2
Press REPEAT/PROGRAM to activate
programming.
3
Press
/
to allocate a number from
1 to 40 to this radio station, then press
REPEAT/PROGRAM
»
of the preset station are displayed.
4
Repeat the previous steps to program
other stations.
20
EN
Tip
You can also use the numeric keypad directly to
allocate a preset number. To allocate a 2-digit number,
then press the number corresponding to the second
digit within 2 seconds.
Note
To overwrite a programmed station, store another
station in its place.
Tune to a preset radio station
Press
/
to select a preset number
that you want.
Tip
You can also use the numeric keypad directly to select
a preset number. To select a 2-digit number, press the
the number corresponding to the second digit within
2 seconds.
Change tuning grid
In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing
the tuning grid erases all preset radio stations.
1
Press RADIO.
2
Press .
3
Press and hold
to toggle between 100