Turn on progressive scan
Note
•
To use the progressive scan feature, you must connect a
progressive scan TV with the component video jacks (see
"Connect" > "Connect audio/video cables" > "Option 1:
Connect to the component video jacks" for details).
1
Turn on the TV to the video input channel for
this product.
2
Press SETUP.
3
Press
to select [Video Setup].
4
Select [Progressive] > [On], and then press
OK.
»
A warning message is displayed.
5
To proceed, select [Ok] and then press OK.
»
The progressive setup is complete.
Note
•
If a blank/distorted screen is displayed, wait for
15 seconds for the auto recovery.
•
If no picture is displayed, turn off the progressive scan
mode as follows:
1) Press
to open the disc compartment.
2) Press the Numeric button '1'.
6
Press SETUP to exit the menu.
7
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
•
During play, when the progressive scan mode is on for
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
5 Play
Play a disc
Caution
•
Do not place any objects other than discs into the disc
compartment.
•
Do not touch the disc optical lens inside the disc
compartment.
1
Press
to open the disc compartment.
2
Insert a disc with its label facing up.
3
Press
to close the disc compartment and
start disc play.
Note
•
Check the types of discs supported (see "Your DVD
player" > "Playable media").
•
If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see "Adjust settings" > "Preferences" > [Parental
Control]).
Play video
Note
•
Some operations may not work with some discs. See the
information accompanying the disc for details.
Control video play
1
Play a title.
2
Use the remote control to control the play.
EN
9