1
Connect the audio cables (supplied) to:
•
the
AUDIO OUT L/R jacks on this
product.
•
the audio input jacks on the device.
Connect USB flash drive
DVD PLAYER DVP3550K
1
Connect a USB flash drive to the
this product.
Note
•
This product can only play/view MP3, WMA, DivX
(Ultra) or JPEG files that are stored on a USB flash drive.
•
Press the
button to access the content and play
the files.
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the product.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
•
The type plate is located on the back of the product.
1
Connect the AC power cable to the wall
socket.
»
The product is ready to be set up for use.
8
EN
4 Get started
Prepare the remote control
1
2
3
jack on
•
If you are not going to use the remote control for a long
time, remove the batteries.
•
Do not use old and new or different types of batteries
in combination.
•
Batteries contain chemical substances, so they should be
disposed of properly.
Find the TV input channel
1
2
Select menu display language
1
2
3
Press and push the battery compartment to
slide it open (see "1" in the illustration).
Insert two AAA batteries with correct
polarity (+/-) as indicated.
Push and slide back the battery compartment
(see "3" in the illustration).
Note
Press
to turn on this product.
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
Press SETUP.
» [General Setup] menu is displayed.
Select [OSD Language], and then press .
Press
to select a language, and then press
OK.