Philips Easylink - Philips DVP3886X/94 User Manual

Philips EasyLink

This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control)
protocol. You can use a single remote control to control EasyLink compliant devices that are connected
through HDMI.
Note
•
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
Make sure that HDMI CEC feature is enabled on the TV and other connected devices (see the user
manual of the TV or other devices for details).
1
Press .
2
Select , and then press OK.
3
Select [Video] > [HDMI Setup] > [EasyLink Setup].
4
Select [On] under the following options: [EasyLink], [1 Touch Play], and [1 Touch Standby].
»
EasyLink is enabled.
1 Touch Play
When you play a disc, the TV automatically switches to the correct video input channel.
1 Touch Standby
When you press and hold
HDMI CEC devices (if they support one-touch standby) switches to standby simultaneously
14 EN
(standby) on the remote control of this player, this player and all connected