Sanyo DP50747 Service Manual page 10

MECHANICAL DISASSEMBLY (CONT.)
A
A
1: Main Board Removal
Remove 5 screws (H:3X6) to take the main board
off.
2: Sub-Power and Filter Board Removal
Remove 12 screws (H:3X6, 9pcs, I:3X8, 2pcs,
J:4X10, 1pc) to take the sub-power and filter
board off.
1. Disconnect the following socket connections.
Control Board ~ Main Board: K8FRA
Speakers ~Main Board: KSP
BOARD REMOVAL
H
H
H
H
H
FILTER GLASS AND SPEAKER REMOVAL
K8FRA
KSP
— 8 —
J
H H H
H
H
H
H H
H
I I
3: Control Board Removal
Remove 2 screws (A:4X14) to take the control
board off.
2. Remove 10 screws (4X14) to take the panel
module with the panel holders (Mounting
Brackets) and boards off.