Table of Contents
Advertisement
DSC programming
AUX ON/OFF (for Kansas DJ, Chicago
RCM 169)
This menu item will not ap-
pear unless a CD changer
has been connected to the
system. The factory setting
is "OFF".
If another system compo-
nent is connected to AUX,
this setting must be altered
to "AUX ON".
LEARN KC
To "train" a second Key-
Card.
Please read the information
in the section on "KeyCard
theft protection system" -
"Training a second Key-
Card".
READ KC
To read out the KeyCard
data.
The card supplied with the
radio is used to display the
model name, type number
(7 6 ...) and the serial
number.
With the extra card it is pos-
sible to display data entered
by your specialised dealer.
(See the section on "Short
Additional Memory S.A.M.").
If you remove the KeyCard
during the reading process,
"READ KC" will appear on
the display panel.
LED ON/OFF Here you can choose be-
tween LED ON or LED OFF.
With LED ON, the "ON"
knob will flash for extra anti-
theft protection when the
unit has been switched off
and the KeyCard removed.
PEAK ON/OFF
Switches the dynamic level
display for the volume on/
off.
TOM ON/OFFIf you have a second Key-
Card with a Turn-On Mes-
sage, you can switch off this
information with "TOM
OFF". The factory setting is
"TOM ON".
For more information refer
to " KeyCard theft protection
system" - "Turn ON Mes-
sage (T.O.M.)".
UPDATE
Allows you to delete CD
names during changer oper-
ation to make room for new
CDs. (Refer to "Deleting CD
names with DSC-UP-
DATE".)
To quit the DSC programming mode and
store the adjustment:
•
Press DSC.
79
Hide quick links:
Advertisement
Table of Contents
