Siemens SINUMERIK 840Di Diagnostic Manual page 847

11/2006
No. 86
Explanation Activate an "ASUB" user interrupt. Is only executed if the channel is in the READY status
(VDI signal: ASUB interface, digital-analog interface).
Cause See No. 10
Remedy -
No. 87
Explanation Perform an "ASUB" user interrupt (VDI signal: ASUB interface, digital-analog interface;
for further actions see 10, 11, 12, 85, 86)
Cause -
Remedy -
No. 88
Explanation Start program processing (VDI signal: Mode group stop)
Cause -
Remedy -
No. 89
Explanation Activate all machine data with the attribute (NEW_CONF) (NC_block: NEW_CONF)
Cause -
Remedy -
No. 90
Explanation Activate all machine data with the attribute (NEW_CONF) (NC_block: NEW_CONF with
block search)
Cause -
Remedy -
No. 91
Explanation Start continuation of interpreter processing (internal preprocessing stop)
Cause -
Remedy -
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), Edition 11/2006
List of Action Numbers
3-847