Yamaha YZF-R25 Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
TIP
After resetting the average fuel con-
sumption display, "_ _._" is shown until
the vehicle has traveled 1 km (0.6 mi).
Oil change tripmeter
1 2
4
1. Oil change indicator "OIL"
2. Oil change tripmeter
The oil change tripmeter shows the
distance traveled since it was last
reset (i.e., since the last oil change).
The oil change indicator "OIL" will
flash at the initial 1000 km, then at
5000 km and every
thereafter to indicate that the engine
oil should be changed.
After changing the engine oil, reset the
oil change tripmeter and the oil change
indicator. To reset them both, select
the oil change tripmeter, and then push
the "RES" button for one second.
Then, while "OIL" and the oil change
tripmeter are flashing, push the "RES"
button for three seconds. The oil
change indicator will be reset.
If the engine oil is changed before the
oil change indicator comes on (i.e.,
before the periodic oil change interval
has been reached), the oil change
tripmeter must be reset for the next
periodic oil change to be indicated at
the correct time.
5000 km
Shift timing indicator light
1. Shift timing indicator light
2. Brightness level display
The shift timing indicator light has four
settings which can be adjusted.
4-8
1
2
Flashing pattern: this function
allows you to choose whether or
not the indicator light will come on
and whether it should flash or stay
on when activated.
Activation point: this function
allows you to select the engine
speed at which the indicator light is
activated.
Deactivation point: this function
allows you to select the engine
speed at which the indicator light is
deactivated.