Yamaha YZF-R25 Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
If the last segment on the right flashes,
stop the vehicle, then stop the engine,
and let the engine cool. (See page
7-42.)
NOTICE
Do not continue to operate the
engine if it is overheating.
4
TIP
The coolant temperature varies with
changes in the weather and engine
load.
Transmission gear display
1
1. Neutral indicator light "
2. Transmission gear display
This display shows the selected gear.
The neutral position is indicated by " "
and by the neutral indicator light.
Multi-function display
1. Multi-function display
2 The multi-function display is equipped
with the following:
an odometer
two tripmeters
a fuel reserve tripmeter
an instantaneous fuel consump-
tion display
an average fuel consumption dis-
play
an oil change tripmeter
an oil change indicator
"
Push the "SEL" button to switch the
display between the odometer mode
"ODO", tripmeter modes "TRIP 1" and
"TRIP 2", instantaneous fuel consump-
tion mode "km/L" or "L/100 km",
average
1
"AVE_ _._km/L" or "AVE_ _._ L/100
km" and oil change tripmeter mode
"OIL TRIP" in the following order:
ODO
L/100 km
AVE_ _._L/100 km
If the left segment of the fuel meter
starts
automatically changes to the fuel
reserve tripmeter mode "TRIP F" and
starts counting the distance traveled
from that point. In that case, push the
"SEL" button to switch the display
between
odometer,
consumption
consumption modes in the following
order:
4-6
fuel consumption mode
TRIP 1 TRIP 2 km/L or
AVE_ _._ km/L or
OIL TRIP ODO
flashing, the display
the various tripmeter,
in-stantaneous fuel
and average fuel