NAD T 778 Owner's Manual page 23

Tone Controls: Tone Defeat/Off
Front Panel Display Setup: Set "BluOS Source Front View" to "Cover Art
and Meta Data"
Speaker Setup: from the Speaker Setup menu, go to "Speaker
Configuration" sub-menu and change "Height 1" and "Height 2" from
"Off" to "Small".
CONFIGURING T 778 - SETUP MENU VIA ON-SCREEEN DISPLAY
2 With the above settings, scroll to "A/V Presets" from the SETUP MENU
page. Use [S] to access "A/V Presets" menu.
3 At "A/V Presets" page, set "Preset: 1" to the following conditions - use
[D/F] to select "Yes" and press [ENTER] to confirm selection and move
on to the next setting.
While at "Save Current Setup to Preset" menu line, use [S] to save the
above settings to Preset 1. Below OSD will be shown, affirming that the
above settings are now saved to "Preset 1".
When you recall "Preset 1" using the remote control (for HTR 8, "A/V
PSET" + "1"), the above preset values allocated at "Preset 1" (preset
settings as shown in the OSD captures at Step 1) will be recalled and
effected at the current source.
4 Now, repeat again Step 1 above but this time with the following
settings
Listening Modes: Dolby Surround/Neural:X/None
OPERATION
23