Advertisement
Digital UHD LED TV
If you need additional information on your new Television, complete instruction manuals are available for reference and download in our SUPPORT section online at www.polaroidhdtv.com
IMPORTANT SAFELY INSTRUCTIONS
a.
Use No.10AWG(5.3mm²)copper,No.8AWG(8.4mm²)aluminun,No.17AWG(1.0mm²)
conper-clad steel or bronze wire,or larger,as a ground wire.
b.
Secure antennal lead-in and grounding wires to house with insulators spaced forom
4-6 feet (1.22-1.83m) apart.
c.
Mount antenna discharge uint as close as possible to where lead-in enters house.
d.
Use jumper wire ont smaller than No.6AWG(13.3mm²)copper,or the equivalent,when
a separate antenna grounding electrode is used.
1. POWER Turns the LED TV on and off (standby mode).
2. S.MODE Sound Mode, press repeatedly to select the presetting sound effect modes.
3. P.MODE Picture Mode, press repeatedly to select the preset picture modes.
4. SLEEP Press repeatedly to activate and/or set the sleep timer.
5. ASPECT Press repeatedly to select the aspect ratio of screen as desired.
6. MTS In NTSC receiving mode, press to select. the audio modes to Mono, Stereo or SAP.
In ATSC Digital receiving mode, press to display the audio selection menu on the screen. Using
7. CC Press repeatedly to activate and/or set the CC (Closed Caption Display) modes.
8. ADD/ERASE In FAV display mode, press to increase or delete the highlighted channel.
9. FAV. Show the list of favorite channels.
10. SOURCE
buttons to select the source as desire then press (ENTER) button to confirm your selection.
11. EPG Press to display the Electronic Program Guide in digital TV channels(Operation in
ATSC mode only functions on signals emitting from TV station) .
12.DISPLAY Press to display the information; settings and the status of current mode/station
on the screen.
Press to move the cursor within the setting menu. ENTER Press the
ENTER button to confirm the selection. Press the "ENTER" button, the check mark
will appear to the channel , and the channel is marked as channel list.
14. MENU Displays the setting menu on the screen.
15. EXIT Press to exit from the setting menu.
16.
Play/Pause picture.
decrease the volume level.
17.
Fast rewind playback.
25. CH+/CH- Press to increase or decrease
18.
Stop playback.
the channel number.
19.
Fast forward playback.
26. REPEAT Set a repeating mode.
20.
Previous file or chapter.
27. 0-9 Numeric buttons.
21.
Next file or chapter
For direct access a digital TV channel.
22. GOTO Go to a specific point in the playback.
(For an example, when access a digital TV
23.
Turn off the sound temporary.
channel number 5-1, press button
Press again to turn the sound back.
"5" + "-" + "1").
24. VOL+/VOL- Press to increase or
29. SWAP Return to previous channel.
DE416T1N4AU-PA4
1
2
P.MODE S.MODE
SLEEP
ASPECT
3
6
CC
MTS
ADD/ERASE
FAV.
7
SOURCE
EPG
DISPLAY
11
ENTER
13
MENU
EXIT
14
16
17
20
GOTO
23
24
VOL
CH
REPEAT
27
28
SWAP
PLEASE READ THIS
We've provided:
A. LED TV
BEFORE REMOVING
B. Stand
PRODUCT FROM
C. Screws (9)
THE BOX
If you prefer to wall mount your
TV, do not attach the stand.
Use the instructions in your
wall-mounting kit (not included).
Simple Steps for Attaching Your TV Stand
7.87"
4
5
7.87"
8
9
10
Four mo unting holes
12
(siz e M6 screw)
TROUBLESHOOTING
15
18
19
21
22
25
26
and / or
Check and make sure the Video output from the connected device is set to HD (High
Definition) and the Audio output is set to PCM (Plus Code Modulation). For details,
29
refer to the Instruction Manual of the connected device.
The TV turn off
No Signal Auto Power off was set to on, when no was received
automatically.
within 30 minutes, the TV will turn off automatically.
Forgotten the
preset parental
Use the master password 1470 to reset a new password.
lock password
Questions？
1-888-636-8599
Empire Electronic Corporation
5550 Jurupa St, Ontario, CA 91761
Mounting on the wall
This unit is VESA-complian,and is
designed to be wall-mounted with
a VESA-compliant 7.87"x7.87"(200
mmx200mm) mounting kit designde
for flat-panel TVs(not supplied).
Mount this unit according to the
instructions included in the monting
kit. Length of screw should not
exceed 8 mm
NOTE
Remove the base stand before
mounting the unit on the wall.
www.polaroidhdtv.com
Advertisement
