Important Safety Instructions • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product.
49” 50” 55” Remote Control 6 Screws User’s Manual TV Set with Batteries TV Stand Installation /Removal 43T7U 200mm 200mm Four mounting holes (size M6 screw) Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket (NOT SUPPLIED).
Page 7
49T7U 200mm 200mm Four mounting holes (size M6 screw) Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket (NOT SUPPLIED). The VESA mounting pattern is 200 x 200 mm. Remove the screws holding the base to the base bracket and lift the base away (do not remove the base mounting brackets).
Page 8
Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket (NOT SUPPLIED). The VESA mounting pattern is 200 x 200 mm. Remove the screws holding the base to the base bracket and lift the base away (do not remove the base mounting brackets).
Front/Back View NOTICE:There is a square glue to protect the IR model,it can be removed after instal the base. Button Functions illuminates green when the TV is turned on. illuminates red when the TV is in POWER LED: standby mode. IR(Infrared Receiver): Receives IR signals from the remote control.
Connecting to External Devices Connecting external devices to your LED TV Headphone OPTICAL RJ45 HDMI3 HDMI2 HDMI1 USB1 USB2 YPbPr AUDIO (ARC) 0.5A 0.5A Not supplied Not supplied cable receiver/satellite box HEADPHONES :Connect to the Headphones. OPTICAL:Connect a digital sound system to this jack. RJ45:Network connection port.
Remote Control 1. POWER: Turn the TV on and off. 2. Input: This button is used to switch among different sources, Select a source and press ENTER button to confirm. Input 3. Digital Buttons(0-9, -): Directly select channel with digital buttons. : Switch to the previous program.
23. VUDU: Press this button to select VUDU application. 24. pandora: Press this button to select pandora application. 25. CC: Press this button to adjust CC mode. Install the Batteries If the remote control fails to operate the TV functions, replace the batteries in the remote control.
Basic Operations Menu Operation OSD language config Menu language Setup Wizard Español Select OSD Language English Press ▼ / ▲ button to select the language to be French used for menus and message. Press ENTER button to enter the next menu. Select ENTER DATA COLLECTION AND FIRMWARE UPDATES NOTICE...
Page 14
Clock Select Clock Set the clock Press ▼ / ▲ button to select the clock . Press ENTER button to enter the next menu. Auto Manual Select ENTER Select Home or Retail Set the TV Mode to Home or Retail display use. Press ▼...
Page 15
Select DST Select Daylight saving time Press ▼ / ▲ button to select the Select Daylight saving time. Press ENTER button to enter the next menu. Select Return ENTER BACK Select Network Configuration Press ▼ / ▲ button to select Network Configuration. Select YES to enter the Network Configuration, More details please see the page 24~26.
Input Setup Press input key on the remote control to enter "INPUT SOURCE" menu. There are these options for you to select: "TV", "AV","Component", "HDMI1", “HDMI2",“HDMI3", “USB". Use /key to select a input source and press Enter key to confirm. Current Channel Information Press “INFO”...
Menu system instruction Picture 1. Press Menu key to display the main menu on the screen. 2. Press ▲/▼ key to select "Picture" option. 3. Press key to enter "Picture" submenu. Picture Mode Your TV has four picture settings (Dynamic, Standard,Movie, Game,Power Saving,User) that are preset at the factory.
Sound 1. Press Menu key to display the main menu on the screen. 2. Press / key to select "Sound" option. Sound Mode 3. Press key to enter "Sound" submenu. Balance Surround Sound Sound Mode Video Description You can select the type of the special sound effect Digital Audio Output to be used when watching a given broadcast.
Digital Audio Output This is used to set digital audio output 1. Press /key to select "Digital Audio Output” option. 2. Press / key to select “Auto” or “PCM”. Audio Languages You can set the first and secondary language for audio. DAP Enable This is used to set DAP.
CEC Link Setup 1. Press / key to select “Link Setup” option. CEC Link Setup 2. Press ENTER or key to enter “Link Setup”submenu. Enable CEC link Enable Link: Press / to turn on/off the link setup. Auto Power On Auto Power On: When this option is “On”...
On Time In "On Time” item, press button or ENTER button to enter the submenu, set the time to turn on the TV set, when the TV set is in the standby mode. You can also choose which day to control you TV set in a week.
Page 22
Closed Caption 1. Press / key to select “Closed Caption" option. 2. Press / key to select CC mode. Reset 1.Press “/" key to select "Reset" option. 2.Press “ " or "ENTER" key to confirm. 3.Press "Yes" to confirm again, TV will turn off automaticly and change all setting to factory setting. Network Configuration Please refer to "Network setting"behind.
Page 23
Set Password Parent Control 1. Press / key to select "Set Password" option. 2. Enter your 4-digit password to enter"Set Set Password Password" submenu. Choose any 4-digits for your USA TV new password and enter them. As soon as the 4 USA MPAA digits are entered, the cursor skipped to “Confirm Canada English...
Channel Before your television can begin memorizing the available channels, you must specify the type of Antenna Mode signal source that is connected to the TV (i.e. an Auto Seach antenna or a cable system). 1. Press Menu key to display the main menu on the screen. Program Edit 2.
Page 25
Favorite(Yellow) button This function can help store the favorite program then these programs can be quickly selected. 1. Select the program which is favorite. 2. Press “Fav”(Yellow) Button, the favorite mark is displayed at the left side of the program and this program is store into the Favorites.
Page 26
Network Setting 1.Press the “ Menu ” to enter, then pitch on the ”Options”,and press “ENTER” or click the right button to enter the submenu. OSD Language OSD Time Closed Caption Reset Network Configuration Software Update(USB) View End-User License Internet Update Check 2.Pitch on the "Network Configuration",and press "ENTER"...
Page 27
4.If shows "Success",the "WLAN" on the bottom right corner will turn to green from red, and it means the network connect successfully; If shows "Fail",it means the network can not connect, please check whether the net wire and router connect successfully or not. 5.
Pitch on the "Setting",press the "ENTER" to confirm. If shows "Success", the "WIFI" on the bottom right corner will turn to green from red, and it means the network connect successfully; If shows "Fail", it means the network can not connect, please check whether the wireless router connects successfully or not.
Troubleshooting If the device performance fails, check whether the detected problem is in the following table. If your device still fails, contact customer service. SYMPTOM POSSIBLE CAUSE REMEDY TV – No signal input Signal cable is loose or not Ensure signal cable is not loose or connected, loose or connected.
Specifications Specifications Model 43T7U TV System NTSC Resolution 3840x2160 Wireless LAN IEEE 802.11b/g/n 2.4-2.5 GHz ISM Band Power Consumption Power Supply AC 100-120V~50/60Hz Connectivity HDMl input x 3 RF Antenna Input YPbPr/AV AUDIO IN RJ45 Headphones Output OPTICAL Output Model...
Page 31
Model 50T7U TV System NTSC Resolution 3840x2160 Wireless LAN IEEE 802.11b/g/n 2.4-2.5 GHz ISM Band Power Consumption 138W Power Supply AC 100-120V~50/60Hz Connectivity HDMl input x 3 RF Antenna Input YPbPr/AV AUDIO IN RJ45 Headphones Output OPTICAL Output Model 55T7U TV System NTSC Resolution...