22
Use the screws to attach the cover you removed in step 2.
If you're using FJ-52/42, close the front cover.
If you're using FJ-52/42
If you're using SJ-600/500
23
Turn on the main power switch at the back side of the unit, then press the [POWER] key to switch on the sub power.
Attach the cover before turning on
the power.
When you turn on the power and close the
front cover, the carriage may move and
cause injury.
24
Load the material.
The top edge of the
cover goes below the top
cover.
Top cover
Screws
(at four places)
Cover
Cover
Screws
(at two places)
Cleaning Kit USER'S MANUAL
The POWER LED lights up
15