Advertisement
Cleaning Kit USER'S MANUAL
19
Use the tweezers to press down the sponge.
Slowly press it downward until it makes contact.
20
Return the carriage to standby position.
NOTICE
If allowed to stand with the carriage remaining away from standby position for a prolonged period, problems
such as drying-out of the printing heads or dot drop-out during printing may occur. When finished cleaning,
promptly return the carriage to standby position.
Move inward until flush.
21
Make sure there is a sponge under the hook.
If the sponge is not at the location shown in the figure (OK), repeat steps 18 and 19.
14
OK
Hook
Sponge
Use the tweezers to press
down the sponge.
Not OK
Hook
Sponge
Advertisement
