Table of Contents
Advertisement
Quick Links
ASSEMBLY AND OPERATION MANUAL
OIL FILTER CRUSHER WITH STAND - 25 TON CAPACITY
: RP-50FC
MODEL
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes to the
purchaser upon receipt from the carrier. Consequently,
claims for the material damaged in shipment must be
made by the purchaser against the transportation
company at the time shipment is received.
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT
YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF
THIS MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.
BE SAFE
Your new Oil Filter/ Can Crusher was designed and
built with safety in mind. However, your safety can be
increased by proper training and thoughtful operation
on the part of the operator. DO NOT operate or repair
this equipment without reading this manual and the
important safety instructions shown inside.
REV A 5900392 04-26-16
Keep this operation manual near the
machine at all times. Make sure that
ALL USERS read this manual.
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Toll Free 1-800-253-2363
www.rangerproducts.com
Tel: 1-805-933-9970
Fax: 1-805-933-9160
Advertisement
Table of Contents
Related Manuals for Ranger RP-50FC
Summary of Contents for Ranger RP-50FC
- Page 1 OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH. REV A 5900392 04-26-16 ASSEMBLY AND OPERATION MANUAL OIL FILTER CRUSHER WITH STAND - 25 TON CAPACITY : RP-50FC MODEL Keep this operation manual near the machine at all times. Make sure that ALL USERS read this manual.
-
Page 2: Warranty Policy
Defective parts replaced at no charge must be returned to your dealer or Ranger Products™ within 60 days of the date that the replacement parts are shipped; otherwise, you must pay for the replacement parts at the current selling price. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Do not attempt to crush aerosol cans, cylinders of compressed gas, fuel filters, or containers of MAKE SURE TO READ AND UNDERSTAND flammable liquids or solvents. ALL INSTRUCTIONS AND SAFETY Do not alter or modify any part of this equipment. PRECAUTIONS AS OUTLINED IN THE MANUFACTURER’S SERVICE MANUAL PRIOR TO USING THIS EQUIPMENT. -
Page 4: Tools / Supplies Required
TOOLS / SUPPLIES REQUIRED Lubricate sliding door on a regular basis to prevent the door from binding. Drill and concrete drill bit to mount unit to floor if desired. A plug to attach to the power Keep the RED Emergency button clean and in working unit electrical cord. - Page 5 RP-50FC OIL FILTER CRUSHER Stop Button (RED) LEFT SIDE VIEW Start Button (GREEN) Reverse Button (BLUE) Sliding Door Base Frame Assembly Removable Side Grate Left & Right Removable Side Grate (Front) Breaker Switch ON/OFF Remote Foot Switches Cable Left Pedal...
-
Page 6: Manual Operation
OPERATION 7. Turn “Off” (down position) breaker switch located on the top left side when the unit is not in use. PRIOR TO OPERATION A VISUAL INSPECTION SHALL BE MADE. CHECK PRESS FOR LEAKS, AVOID OFF-CENTER LOADS. IF THE PRESS WORN OR MISSING PARTS. - Page 7 RP-50FC PARTS BREAKDOWN...
- Page 10 RP‐50FC ELECTRICAL SCHEMATIC TOP LIMIT SWITCH NC C NO DOOR SWITCH PRESSURE SWITCH POWER UNIT NEW PART # ON/OFF ON/OFF SWITCH SWITCH SOLENOID VALVE LEFT FOOT RIGHT FOOT SWITCH SWITCH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 PIN EDGE CONNECTOR...