Philips SRU5130/87 Quick Start Manual

Quick Start Guide

EN
Getting started in five easy steps.
1
2
3
4
5
Switch on your TV.
Check if the TV responds to all key
commands. If the TV does not
respond, continue with step 2.
Press the SET UP key until the
light flashes twice and then
remains lit.
Look up and enter the 4-digit
code for your brand of TV.
See 'Code list'.
Press and hold the Standby key
( y y ) until the TV switches off
(standby).Then release the key
immediately.
Note: the remote control will send
multiple codes to the device
trying to find the correct one.
Switch on your TV and check if
you can operate all functions on
it with the remote control.
If a key does not function
properly, keep it pressed until it
works.Then release the key
immediately.
Keep the SET UP key pressed for
5 seconds to exit setup mode
and save settings.
Repeat above steps for all
devices you wish to operate
with the remote control.