Extra Possibilities; Labelling Favorite Keys; Storing Favorite Keys - Philips SRU4002X/10 User Manual

Philips universal remote control sru4002x
Hide thumbs Also See for SRU4002X/10:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
SRU4002_booklet_v4
8
ENGLISH

4. Extra possibilities

With this remote control you are able to install 4 of your favorite channels under 4 special keys.

Labelling favorite keys

By labelling the Farorite keys you can always tell which favorite channel is stored under a key.
1
Lift up and remove the ring around the key, using your nail.
2
Take off the key cap.
3
Remove the paper sticker from the key surface and replace it with a logo
from one of the logo sheets supplied.
4
Replace key cap and ring. Press gently until they click into position.

Storing favorite keys

Notes:
Make sure you have the original TV and / or STB remote control at hand.
Make sure both remote controls are properly aligned.
Place both SRU 4002 and original remote control on a flat surface
(e.g. a table) and aim them head-to-head with about 4 cm in between.
If no key is pressed for 60 seconds after entering learning mode, the LED flashes
once for a longer period and the remote control exits learning mode.
If a key is pressed in time (within 60 seconds after the previous one) and the LED flashes once for a longer
period, a channel or function is not stored. In this case, repeat the steps described and be sure the remote
controls are properly aligned.
If this does not work, the remote control memory is full. In this case you have to restore the original functions
of the remote control in order to create memory space. For this, refer to 'Restoring the original functions of
your remote control'.
27-08-2008
13:20
Pagina 8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sru4002b/10Sru 4002

Table of Contents