Philips SBCHP1500/17 Instructions For Use Manual page 14

0912HP_EU 09-12-2003 12:12 Pagina 14
ENGLISH
14
7 Night mode section
a) button to activate Night mode
– Night mode will reduce the dynamics of the audio signal.This will
result in both the loudest and the most silent audio signals becoming
clearly audible, even at lower volume levels.
– The audio signals on a DVD movie disc have large dynamics, i.e. the
difference in loudness between the loudest and most silent signal can
be very large. In order to hear both the loudest and most silent signal
you normally would have to turn up to volume of the headphone.
In case however you would prefer to listen at lower volume levels, it
could result in the most silent signals becoming difficult to hear: by
making use of the night mode this can be resolved.
b) 'Night Mode' menu field yellow LED:
lights up whenever Night mode is possible
c) 'NIGHT' indicator green LED:
lights up whenever Night mode is activated
8 Dynamic Bass Boost section
a) button to toggle the DBB function
b) 'DBB' menu field illuminated by yellow LED
c) 'DBB' indicator green LED: lights up whenever DBB is active
9 Headphone output section
a) 2 x 6.3mm headphone jack sockets
b) rotary volume control
Base station rear panel (figure 2)
10 Power connector
a) AC connector for AC mains cable
11 Analogue Input/Output connectors
a) stereo input (L/R)
b) stereo output (L/R) providing AASR function
c) 2-position slide-switch to select the analogue input-GAIN
(+6dB/0dB):
– set to +6dB in case of weak audio input signals
– set to 0 dB in case of distorted audio input signals
12 Digital Input/Output connectors
a) coax input (S/P DIF)
b) coax output (S/P DIF) providing AASR function