Mounting
Length in m
10
There is a control cabinet feedthrough available for IWLAN devices located in a
control cabinet. You will find detailed information in the catalog IK PI.
3
Mounting
3.1
Wall mounting
The mounting plate for the antenna has four threaded bolts (position A) to which the
universal fittings are secured. The tightening torque for the bolts is 5.7 Nm.
To mount the antenna on a wall, you will also need to use the joint (position C) to
achieve the degree of freedom available when it is mounted on a mast. The
tightening torque for securing (position B) is 24 Nm.
Secure the universal fittings to the wall using the four holes (position D).
22
Article number
6XV1875-5AN10
Antenna ANT793-8DJ
A5E03484059, 01/2017