ADC Adtemp Mini 432 Instructions For Use

Infrared Thermometer
Instructions for Use
Thank you for choosing an ADC
new thermometer is designed to provide accurate body temperature measurements. Adtemp
thermometers meet or exceed all relevant international performance standards.
Device Description and Intended Use
The Adtemp 432 Non-Contact Thermometer is a clinical grade device intended for the
intermittent measurement of human body temperature in patients of all ages.
Contraindications
Do not use on scarred or compromised tissues.
Do not use with patients in trauma or those being treated with medications that affect skin
temperature.
Do not use when the measuring site has been exposed to direct sunlight or extreme temperatures
Parts and Assembly
USB for
Charging
Mini
USB Cable
Symbol Definitions
The following symbols are associated with your thermometer.
Not made with natural rubber latex

General Warnings

A warning statement in this manual identifies a condition or practice which,
if not corrected or discontinued immediately, could lead to patient injury, illness,
or death. The thermometer is safe for patient and clinicians when used in
accordance with the instructions and with the warning and caution statements
in this manual. Before using the thermometer, familiarize all operating personnel
with the general safety instructions provided in this manual.
WARNING: The thermometer is designed for the intermittent measurement of the human body' s
temperature and can be used upon people of all ages. The following recommendations
must be carefully observed during the product' s use. Any activities that are inconsistent
with or do not take into account these recommendations, could result in personal injury
or could affect the accuracy of the thermometer.
WARNING: Stop using the device if malfunctions appear or if it operates abnormally.
WARNING:: Components may be harmful if swallowed. Keep out of reach of unsupervised children.
WARNING: Some medications may cause a rise in skin temperature which can consequently lead to
incorrect measurements.
WARNING: Only use the thermometer indoors. Do not use this device close to strong electromagnetic
fields, such as mobile phones.
CAUTION: Proper measurement distance between 1 cm and 2 cm from the patient' s forehead is
essential to the accuracy of the temperature measurement determined.
CAUTION: Unauthorized modifications to the device are not permitted. Do not modify the product
in any way without the manufacturer' s prior authorization.
CAUTION: In order to avoid incorrect measurements, make sure that the thermometer' s infrared
sensor lens is clean and intact prior to use. Avoid touching the infrared sensor lens
directly with your fingers.
CAUTION: Do not expose the thermometer to extreme temperatures or humidity levels. Do not
expose to direct sunlight.
CAUTION: The thermometer is NOT waterproof.
CAUTION: Avoid dropping the device.
CAUTION: Do not autoclave or clean with chemical solvents. Follow only the cleaning procedures
described in this manual.
CAUTION: Avoid taking temperature measurements for at least 30 minutes after physical activity,
bathing, swimming, consuming food or beverages, or spending time outdoors.
CAUTION: Avoid pointing the infrared sensor at any heat source other than a patient. This might
affect patient measurement.
CAUTION: If possible, measurements should always be taken by pointing the infrared sensor at the
same area of the forehead. Temperature measurement at different locations on the
temples or on opposite sides of the head can vary considerably.
CAUTION: Holding the thermometer in your hands for too long or exposing the device to external
head sources could result in distorted temperature readings. For this reason, the body
temperature reading could result as being higher or lower than the actual value.
CAUTION: Dispose of the device and battery in accordance with locally applicable regulations.
CAUTION: The device is not intended for field-based emergency medical use.
CAUTION: For maximal performance of the device, we recommend a calibration check every two years.
Changing the Measurement Scale
1. Press and release the multifunction button to turn on.
2. While self-check screen is displayed, press and hold the multifunction
button. When °C or °F mode has changed, release the button.
3. Thermometer will switch to measurement mode in about two seconds.
Adtemp
Non-Contact
® Adtemp
LCD Display
Mini 432
TM
TM Mini Non-Contact Infrared Thermometer. Your
Sensor Lens
Memory
Indication
Measure
Multifunction
Button
Extendable
Lanyard
0197
M
Low Battery
Indication
Value
.
Forehead
Measurment
Measuring
Scale