8. S-BOX Installation and Connection
Samsung Electronics
⑨ Instruction for trimming HDBase-T cable on site.
STP RJ45 shielded Plug. RJ45 Connector should be CAT6 or CAT7 shielded RJ45 and load bar.
Load bar
Insert conductors into the plastic loader : Using the standard wiring scheme shown here (T-568B), insert the conductors
into the plastic loader piece of the R-J45 connector. The plastic loader is necessary because the thickness of CAT 6 cable
does not allow it to sit flat in an RJ-45 connector like in normal CAT 5.
Load bar and Drain wire
Wires aligned with Load bar