Markings On Tool; Important Safety Instructions For All Battery Chargers - DeWalt DCT414 Original Instructions Manual

CAUTION: Use of controls or
adjustments or performance of
procedures other than those
specified herein may result in
hazardous radiation exposure.
• To avoid damaging the IR Thermometer or the
equipment under test, protect them from the
following:
– EMF (electromagnetic fields) like from arc
welders, induction heaters, etc.
– ESD (electrostatic discharge).
– Thermal shock (caused by abrupt ambient
temperature changes – for highest accuracy,
allow 30 minutes for thermometer to stabilize
before use).
• The label on your tool may include the following
symbols.
V .........................................volts
mW .....................................milliwatts
. .......................... laser warning
nm ..................................... wavelength in
2 .........................................Class 2 Laser
3a .......................................Class 3a Laser
WARNING LABELS
For your convenience and safety, the following label
is on your IR thermometer (fig. 1A).
WARNING: LASER RADIATION. DO
NOT STARE INTO BEAM. CLASS 2
LASER PRODUCT. MAXIMUM OUTPUT
POWER < 1 mW @ 620 – 690 nm.

Markings on Tool

The following pictograms are shown on the tool:
Read instruction manual before use.
Alarm Mode Button: Is used to select the
type of alarm and to set the high (HAL)
and low (LAL) temperature limits for the
alarm.
Min/Max/Avg Mode Button: Displays
either the lowest, highest or average
temperature.
Adjustment Button: Used with each mode
button to set desired value.
DATE CODE POSITION
The Date Code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery.
Example:
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual
contains important safety and operating instruc tions
for the DCB100 battery charger.
• Before using charger, read all instructions and
symbol
cautionary markings on charger, battery pack,
and product using battery pack.
nanometers
• DO NOT attempt to charge the battery pack
with any chargers other than the ones in
this manual. The charger and battery pack are
specifically designed to work together.
• These chargers are not intended for
any uses other than charging D
rechargeable batteries. Any other uses
may result in risk of fire, electric shock or
electrocution.
EMS Mode Button: Set emissivity value.
C/F Mode Button: Used to set
temperature units of measure (Celsius or
Fahrenheit).
2010 XX XX
Year of Manufacture
WARNING: Shock hazard. Do not allow
any liquid to get inside charger. Electric
shock may result.
CAUTION: Burn hazard. To reduce
the risk of injury, charge only D
rechargeable batteries. Other types of
batteries may burst causing personal
injury and damage.
NOTICE: Under certain conditions, with
the charger plugged into the power
supply, the charger can be shorted by
foreign material. Foreign materials of
a conductive nature such as, but not
limited to, grinding dust, metal chips,
steel wool, aluminum foil, or any buildup
of metallic particles should be kept away
from charger cavities. Always unplug the
charger from the power supply when
there is no battery pack in the cavity.
Unplug charger before attempting to
clean.
WALT
E
EN GL IS H
WALT
E
29