H3C S9500E Series Connecting Manual
Hide thumbs
Also See for S9500E Series:
- Configuration manual (459 pages) ,
- Command reference manual (225 pages) ,
- Security configuration manual (207 pages)
Table of Contents
Advertisement
Quick Links
Contents
Connecting the switch to the network ························································································································· 1
Cable routing recommendations ····································································································································· 1
Logging in to the switch ···················································································································································· 1
Connecting the console cable ································································································································· 1
Setting up a configuration environment ················································································································· 2
Powering on the switch····················································································································································· 5
Powering on the switch ············································································································································ 5
Verification after power-on ······································································································································ 7
Connecting the switch to the network ····························································································································· 8
Connecting the switch to the network through an AUX cable ············································································· 8
Connecting the switch to the network through an Ethernet twisted pair cable ·················································· 8
Connecting the switch to the network through an optical fiber ··········································································· 9
i
Advertisement
Table of Contents
Related Manuals for H3C S9500E Series
Summary of Contents for H3C S9500E Series
-
Page 1: Table Of Contents
Contents Connecting the switch to the network ························································································································· 1 Cable routing recommendations ····································································································································· 1 Logging in to the switch ···················································································································································· 1 Connecting the console cable ································································································································· 1 Setting up a configuration environment ················································································································· 2 Powering on the switch····················································································································································· 5 ... -
Page 2: Connecting The Switch To The Network
Connecting the switch to the network Cable routing recommendations Interface cables and power cords should be separately routed. Reasonable cable routing can improve efficiency by facilitating installation and removal of fan trays, and some other components. Interface cables are routed through the cable management brackets on the left and right sides of the •... -
Page 3: Setting Up A Configuration Environment
Table 1 Console cable pinouts RJ-45 pin Signal DB-9 pin Signal Figure 2 Connecting the switch and the PC through the console port To connect the console cable: Connect the DB-9 connector of the console cable to the serial port of a PC or terminal. Connect the RJ-45 connector of the console cable to the console port of the MPU of the switch. - Page 4 Figure 3 Connection description Select the serial port to be used from the Connect using list, and click OK. Figure 4 Setting the serial port used by the HyperTerminal connection Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None, and click OK.
- Page 5 Figure 5 Setting the serial port parameters Select File > Properties in the HyperTerminal window. Figure 6 HyperTerminal window On the Settings tab, set the emulation to VT100 and click OK. NOTE: H3C recommends that you select the Windows keys option button.
-
Page 6: Powering On The Switch
Figure 7 Setting the terminal emulation in Test Properties dialog box Powering on the switch CAUTION: Before powering on the switch, identify the power switch in the equipment room so that you can disconnect the power supply promptly in case of an emergency. Before powering on the switch, verify that: The interface cables, power cables and the grounding cable are correctly connected. - Page 7 Done! **************************************************************************** H3C S9500E BootWare, Version 1.09 **************************************************************************** Copyright (c) 2004-2009 Hangzhou H3C Technologies Co., Ltd. Compiled Date : Jul 22 2009 CPU Type : MPC8548E CPU L1 Cache : 32KB CPU L2 Cache : 512KB CPU Clock Speed : 1000MHz...
-
Page 8: Verification After Power-On
The output depends on your switch model. • Verification after power-on H3C recommends that you check the following conditions after the switch is powered on: The cooling system is working. You should be able to hear fan rotation noise and feel air being •... -
Page 9: Connecting The Switch To The Network
Connecting the switch to the network TIP: After connecting the switch to the network, you can use the ping or tracert command to check the H3C S9500E Switch Series interoperability between the switch and network. For more information, see Network Management and Monitoring Command Reference Connecting the switch to the network through an AUX cable You need an AUX cable when configuring a switch with the remote modem dial-up approach. -
Page 10: Connecting The Switch To The Network Through An Optical Fiber
Connecting the switch to the network through an optical fiber Use an optical fiber to connect an optical fiber port, for example, Ethernet fiber port, POS fiber port, or RPR fiber port, on the switch to the network. You must install a transceiver module to the switch, and then insert the fiber connector to the module. - Page 11 Figure 9 Installing an SFP module NOTE: Do not remove the dust plug of the SFP module port before installing an optical fiber. • • For an SFP+ module installed with an optical fiber, remove the fiber before you install the SFP module into the slot.
- Page 12 NOTE: SFP+ cables are hot swappable. • When connecting an SFP+ cable, make sure the bend radius of the cable is no less than eight times of • the diameter of the cable. Figure 11 SFP+ cable (1) Connector (2) Pull latch To connect an SFP+ cable: Wear an ESD-preventive wrist strap and make sure it makes good skin contact and is well grounded.
- Page 13 Figure 12 Installing FMTs...