Version Check - Samsung ST80 Service Manual

Firmware update

4-2 Version check

This describes how to check the version of the current firmware of the camera.
■
1. Use fully charged batteries for power.
2. First turn off the power of the camera.
3. Press the Shutter button + Wide button, and then turn the
q
4. Check the version of the firmware and then turn the power off.
4-2 This Document can not be used without Samsung's authorization
POWER on.
w
Power On
w
Fig. 4-4
Fig. 4-5
Shutter Button + Wide Button
q
SAMSUNG